Production

The production and technological complex "NT-Veliky Novgorod", which is part of the structure of the Limited Liability Company "New Technologies", is equipped with modern German equipment for the production of various TERMIT products.

The production facilities produce more than 10,000,000 meters of fabric.

Technological process for obtaining finished products:

1. In the production of elementary fibers, two technologies are used - one-stage and two-stage. From the glass melting furnace, the glass melt is distributed into spinneret feeders and then the fibers are drawn.
2. Using these technologies, we can obtain 2 types of fibers: continuous (complex glass threads more than 20,000 meters long, with a diameter of 3 to 50 microns) and staple fiber (length from 1 to 50 cm, diameter 0.1-20 microns )
3. After this, the fibers are treated with a lubricant, at this stage the strength of the glass fiber is enhanced, and hydrophobization and reduction of electrification occurs.
4. After treatment with lubricant, complex twisted threads or unidirectional threads are made.
5. At the final stage, fabrics, ribbons, and nets are produced on looms.

The main range of products produced at our plant under the Termit brand:

Technical glass fabric TG-200, TG-430, TG-600; glass fabric with polyurethane, silicone and teflon coating TERMIT S1, S2, P1, P2, PTFE and silica fabrics TERMIT Hight S/P with polyurethane and silicone coating, silica fabrics T-K11-300(88), T-K11-300 TO( 82), T-K11-300 TOA (82), T-K11-8/3-600 (130), T-K11-8/3-TO (120), textured glass fabrics TERMIT GT with coating: vermiculite, calcium- silicate with and without steel wire reinforcement; needle-punched glass mats TERMIT AF, thread-stitched glass mats TERMIT CF and silica mats TERMIT KF, multilayer silica fabric TERMIT X2, X3; heat-reflecting fabrics TERMIT, TERMIT T